The Chatsworth Global Standard is an easy to use solution for managing
equipment and cabling at the cross connect. It includes one CPI Standard
Rack, a concrete floor installation kit, and one or two CPI Global Vertical
Cabling Sections packaged in a single carton. Standard Rack will support
patch panels, fiber enclosures and network switches, is UL Listed as a
communications circuit accessory to meet code requirements, and is easy
to set up and use.

Global Vertical Cabling Section is a single-sided cable
management trough that controls cable feed with a patented system of large
cable openings that align with each equipment-mounting space (RMU) on the
rack. The snap-on cover provides easy access to cables and a clean, finished
look for a complete cable management system. 2 Post Global Rack                            

    

The Chatsworth Universal Rack is a heavy duty storage solution for patch
panels and network switches and can be used with shelves to hold computer
servers. Universal Rack uses less floor space than a cabinet or a four-post rack.
Use Universal Rack in telecommunications rooms or equipment rooms to save
floor space and hold heavy equipment. Universal Rack meets project
specifications.

Universal Rack holds 1,500 lb of equipment and is available UL Listed
as a communications circuit accessory. Universal Rack supports 19”, 23”
or 35” wide rack-mount equipment and shelves and is available in several
heights. Equipment attaches to the front or rear of the 3” deep vertical
mounting channels with screws. Equipment mounting positions are marked
and numbered making it easy to position and install equipment or
shelves. 2 Post Universal Rack


   

The QuadraRack™ 4-Post Frame provides a sturdy, cost-effective solution
for supporting large rack-mount communications equipment, such as routers
and voice or network switches, in telecommunications and equipment rooms
and other network facilities. The QuadraRack offers the strength and stability
of an enclosure in an open mounting system that provides easy access to
equipment and cabling.

The QuadraRack 4-Post Frame will support up to 2000 lb of equipment.
The corner posts are C-shaped equipment mounting channels that that
are fixed 29” apart to provide front and rear support for 19” rack-mount
equipment or shelves. The channels surround and protect equipment.
Each rack-mount space is marked and numbered on the channels
making it easy to locate and position equipment. Mounting holes are
threaded allowing quick installation of equipment or shelves.
4 Post Quadrarack                              

  

The Adjustable Rail QuadraRack™ (ARQR) and the Adjustable Rail
ServerRack (ARSR) provide a sturdy, feature rich solution for supporting
rack-mount network, computer server and data storage equipment in
data centers, computer equipment rooms and other IT facilities. Both
racks offer the strength and stability of an enclosure in an open four-post
mounting system that provides easy access to equipment and cabling.
The front and rear frames are welded to speed assembly and increase
strength.

Four brackets connect the front and rear corners of the frames.
Front mounting rails attach to the front frame in a fixed position and align
with the front of the rack or can be reversed for recessed mounting to
maximize side-to-side airflow through network switches. Rear mounting
rails can be adjusted in depth even after the rack has been bolted to the
floor and can be extended beyond the rear of the frame by 6” (150 mm).
A second set of holes along the sides of the frame lets you add optional
side-mounted equipment support rails and vertical power strips that are
independent of the mounting rails and use no RMU space. The bottom of
the rack is punched for easy floor attachment. Each rack will support up to
2,204 lb (1000 kg) of equipment. 4 Post Adjustable Quadrarack


 

Enhanced SteelFrame Cabinet is an easy way to organize, store and
secure equipment in your data center computer room . Designed as a
modular system, you select cabinets, external cable managers and side
panels to create equipment storage bays.

Enhanced SteelFrame is a 24”W x 84”H (610 mm x 2130 mm) cabinet
that includes two pairs of equipment mounting rails to provide front and
rear support for 19” rack-mount equipment. Enhanced SteelFrame is
available in a 36” (910mm) or 39” (990 mm) usable depth, provides 45
RMU for equipment and will support 2,000 lb (907.2 kg). An Integral
Air Dam prevents air from flowing around rack-mount equipment and
blocks hot air at the rear of the cabinet when used with accessory Filler
Panels to close open rack-mount spaces. There are two configurations.
Use the Low kW Cabinet with perforated front and rear doors for
front-to-rear airflow and heat loads up to five kilowatts. Use the High kW
Cabinet with perforated front door, solid rear door and top fan for
front-to-top airflow and heat loads above five kilowatts. For best results
with higher heat loads, keep hot air out of the room by ducting it through
an Airflow Duct into a drop ceiling plenum Enhanced SteelFrame Cabinet     


 

The M-Series MegaFrame Cabinet supports a vast array of potential
applications. The cabinet is available in 72”, 78” and 84” heights and
in varying widths and depths to meet the most stringent demands. Also,
the M-Series cabinet system now allows the user to specify mounting
rail options that are designed to meet demands of the Communication
and Information Technology (IT) market. This series makes it possible
to mount equipment such as the Compaq® Proliant Rack-Mount
Servers, Dell™ Power Edge Servers, Sun® Equipment, IBM®, HP®,
and other equipment within the same MegaFrame Cabinet.
M Series Megaframe



 

The N-Series TeraFrame™ Network Cabinet provides an engineered
solution for network switches and cabling in data centers with
hot aisle/cold aisle layouts, delivering superior thermal management for
high-density applications.

Featuring offset doors and side panels, the N-Series TeraFrame Network
Cabinet provides extra interior space around the cabinet frame for cable
management and enhanced airflow. Select the Network Switch Exhaust
Duct option when deploying network switches that require side-to-side
airflow. The Network Switch Exhaust Duct, designed to support Cisco
6500 and 9500 series switches, isolates and re-directs hot exhaust air
from the side to the rear of the cabinet to help prevent the re-circulation of
hot air through equipment and establishes best-practices for a
hot aisle/cold aisle layout. N Series Teraframe



Leviton

Leviton Fiber rack mount enclosure for inter-connect or cross-connect
between backbone cable and active equipment while utilizing minimum
rack space in frame or cabinet setting. Enclosure feature set and design
allows for installer’s ease in field termination of connectors, splicing, or
pre-terminated Plug-n-Play solution. Primary usage in high density fiber
application such as Data Centers, Equipment Rooms, Central Offices, etc.
FiberOptic Rack Mount Enclosures


ProComm services the areas of Benicia Ca, Concord Ca, Fairfield Ca, Martinez Ca, Napa Ca, Sacramento Ca, San Ramon Ca, Vacaville Ca, Vallejo Ca, Walnut Creek Ca, Solano County Ca, Contra Costa County Ca, Sacramento County Ca, Napa County Ca, Alameda County Ca, Santa Clara County Ca, San Francisco County Ca